AMT209

From Ace Monster Toys Wiki
Revision as of 21:34, 4 August 2018 by Monster (talk | contribs) (Created page with " == AMT209 == '''Status:''' {{#amtasset:AMT209}} '''Name:''' ePhotoInc 15x15" Heat Press '''Location:''' Clean Fab '''Pictures: ''' == '''How To Use''' == Plug in t...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

AMT209

Status: Unknown status

Name: ePhotoInc 15x15" Heat Press

Location: Clean Fab

Pictures: 

How To Use

Plug in the machine on a stable surface and make sure the swing arm is up (you don't want it heating up with it clamped shut).

To change the temperature, press the "Temp" button next to the display - the temperature will flash. Use the up and down keys to set your desired target, and then press "Temp" again to set. You can set the timer the same way with the "Time" button.

The display will otherwise show the current temperature of the heating element and the timer. Wait for the temperature to hit your target, then place your item on the platen, and pull down the handle until it locks into place. The timer will count down automatically while you're holding it down, and then will beep when it's time to release.