AMT169

From Ace Monster Toys Wiki

Status: Up. Cleared out, also put a HEPA filter onto the vac as we are using it to suck up fine powder like dust from laser room filters. [joshr @ 5/6/18 11:00]

Name: Ridgid 3 gallon wet/dry shop vac

This shop vac is used to clean the laser cutter: AMT001

Location: Laser cutting room (sits between the laser cutter and the main material storage shelves.)

Make/Model:
Manufacturer: RIDGID
Model # WD3050

Replacement filter: 
VF3400
(installed) or VF3501 (dry dust bag type)

Documentation: 
Basic Care guide pdf:https://www.homedepot.com/catalog/pdfImages/3b/3bda542d-d7b1-4a3a-bdc5-3db3d900fb6d.pdf

Pictures:
38688634544_88384a2700_b.jpg
24531060087_4287a1fb02_b.jpg
38688633274_bc189f191f_z.jpg