• Up. Nozzle check 100% working for class [@greg.habiby @ 03/28/2024 12:27 am]
• Up. Replaced right waste tank [@greg.habiby @ 03/28/2024 12:23 am]
• Up. Nozzle checked. Material: heavyweight matte paper [@dylanaubuchon @ 03/22/2024 10:49 pm]
• UP. Nozzle Checked, OK. Material- Matte Paper Ace printing black and white sewing pattern. [@mccannahancock @ 03/17/2024 07:12 pm]
• Up. Ink tanks are filled except Light Cyan - where we only have 1/2 (110ml) and no backup (need to order). I [@greg.habiby @ 02/21/2024 11:39 am]
• Up. Nozzle checked. Ok. Material- Heavywaight matte. Ace supply. [@saronzewdies @ 02/19/2024 08:05 am]
• UP. Nozzle Checked, OK. Material- Inkjet Canvas. Personal stock. [@saronzewdies @ 02/16/2024 04:27 am]
• UP, black ink tank was being finicky so team swapped it for the larger tank [@potatoart @ 02/08/2024 06:57 pm]
• Down. Found printer ink tank open and the black ink cartilage ejected. Broken sign placed. [@saronzewdies @ 02/08/2024 05:18 am]
• UP, requires certification - see calendar for upcoming cert classes [@potatoart @ 01/09/2024 07:17 pm]
• DOWN - firmware updated to version TW024MB. now recognizes ink tank levels correctly. [@david215 @ 11/21/2023 05:39 pm]
• down, CSIC chips ordered and on the way [@potatoart @ 04/05/2023 12:19 am]
• does not work, the black ink cartridge (#5) is full but is not accepted by the printer [@aurelien.bocquet @ 10/27/2022 01:44 am]
• Printer cleaned but needs cartridges replaced to be useable [@ramaboo @ 05/13/2022 04:17 am]
• UP - Epson 9880 is loaded with HP Universal Bond Paper Q1398A 42-inch roll, and it's working, as confirmed from a successful print. [@graf @ 02/25/2022 05:13 am]
• Epson 9880 is out of full size printer paper. There are other sizes available (
• Epson 9880 prints gray instead of dark black. Swapped out matte black cartridge (#5) but it didn’t have a noticeable effect on test print [@michael.sanders @ 01/17/2022 05:07 am]
• Epson 9880 is Printing. Cyan, Magenta, Ligh light black, and light cyan cartridges show as empty, but this wont stop the printing process [@ryfaraola @ 06/06/2021 12:50 am]
• Currently Not Printing. Printer reads full cartridges as empty. Chip Resetter worked on genuine epson cartridges, but not aftermarket cartridges. Waiting to get new chips for cartridges. [@ryfaraola @ 05/26/2021 05:32 pm]
• UP, nozzles checked, head aligned, ink levels acceptable. maintenance tanks near full. roll paper retracted to prevent indenting - feed the paper from the roll into the printer (using the lever on the right side) before using roll paper media. [@jim @ 12/23/2020 09:05 pm]
• UP. Ink levels are adequate, tests succeeded. Auto Nozzle Checking is now off so the printer doesn't print dots every time you try to print YAY! [@gregwwolff @ 02/06/2020 05:31 am]
• Up. Test prints succeeded, yellow and light magenta ink were replaced. [@gregwwolff @ 01/06/2020 02:55 am]
• Down just endlessly prints CMYK rectangle pattern when print requested. [@crafty @ 12/19/2019 01:40 am]
• Up Paper found and loaded. Not the cheap stuff. [@crafty @ 12/11/2019 03:33 am]
• UP. Ink levels are nearing their end, but tests succeeded. Replacements are above the printer cabinet. [@gregwwolff @ 11/13/2019 09:48 pm]
• Up. Ink levels are adequate, tests succeeded. [@gregwwolff @ 10/26/2019 10:51 pm]
• Up. Yeah. [@crafty @ 10/19/2019 06:36 pm]
• Ink levels are adequate, test prints succeeded. Printer is up. [@gregwwolff @ 10/15/2019 08:26 pm]
• Up. Still. Example post for How AMT Works [@crafty @ 09/14/2019 06:06 pm]
• Up @rodhuefres I have replaced the needed ink (used the chip resetter). Ran a power clean and test print. No error messages and the printer is ready to use. [@crafty @ 08/07/2019 03:49 pm]
• Up - need matte paper [@crafty @ 11/10/2018 10:21 am]

Last Updated: 2024-04-25 22:36:32